Multiparameter Meters
HANNA INSTRUMENTS INC Low Range pH/Conductivity/TDS Tester
The low range Combo pH, EC, TDS (ppm) and temperature meter is one of Hanna's most popular meters. The waterproof design, simple operation, and replaceable electrode mean that you can rely on this meter for years.The HI98129 is designed for low range use (0 to 3999 µS/cm or 0-2000 ppm). Choose the HI98130 for the high range model.Compact & waterproof design fits right in your pocket so you can take it anywhere.Replaceable pH electrode extends the life of your tester for years.
Cole-Parmer Oakton PC700 PC 700 Benchtop Meter with Electrode Stand
The PC700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance. Dual-display allows you to read both a measured parameter and temperature at a glance. The meter features pH auto-buffer recognition for both USA and NIST buffer sets (1.68, 4.01, 7.00, 10.01 and 12.45 or 1.68, 4.01. 6.18. 9.86, and 12.45), automatic or manual temperature compensation, temperature in °C, display Hold, and water-resistant membrane keypad. Previous calibration points, electrode slope and offset, and conductivity/TDS cell constants (0.1, 1.0 and 10) are stored in memory for quick and easy retrieval. The convenient pull-out quick reference card keeps keypad functions at your fingertips.
Cole-Parmer Oakton pH 700 Benchtop Meter with Probes and Stand
Compact footprint is over 40% smaller than other benchtop meters. Large display permits easier readout viewing. Datalogging allows you to store and recall up to 100 data sets. The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility-even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, selectable f or C measurement, recall of electrode slop and offset, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.
Hach Company Hach MP-4 Portable Meter (HMP4) - Probeless conductivity, TDS, resistivity, and temperature meter
The MP-4 Portable Meter is a cableless, single-handed instrument for rapid testing of conductivity, resistivity, total dissolved solids (TDS), and temperature in clean water applications. Integrated sample cups and one-button operation enable fast, probeless measurements suitable for pool and spa monitoring, water treatment, and field testing.
- Probeless operation with integrated sample cups.
- Measures conductivity, resistivity, TDS, and temperature.
- Temperature accuracy of ±0.1 °C.
- Battery life greater than 100 hours (≈5,000 tests) with auto-shutoff.
- One-button calibration; typical calibration interval two weeks to monthly.
- Automatic temperature compensation; adjustable or disableable.
- User-adjustable conductivity/TDS conversion ratio for nonstandard solutions.
- Data retained in non-volatile memory; waterproof and buoyant-operational after immersion up to 1 m (3 ft).
Cole-Parmer Extech 380941 DC/AC Clamp Meter, 200 Amp
This clamp meter amp features a large 4,000 count LCD display with full function indication, along with a fast 40 segment analog bargraph. Its One touch "Auto Zero" provides DCA measurements to eliminate the need to turn a knob to zero adjust. There also is a data hold, maximum and minimum recall display. The opening of the clamp jaw is about 0.9 inches or 23 millimeters.
Bellco Glass, Inc. Dual CellTrol,pH/DO/Tem/SP 4 Pumps
The CellTrol II control module monitors bioreactors process values and performs PLC (Allen-Bradley Programmable Logic Controller) based process control. A touch screen operator interface provides access to all PLC based control functions andallows viewing and modification of control parameters. Signals types include temperature, pH, DO, speed, and foam/level. PLC control drives the inc/dec outlets assigned to each channel as well as to pumps mounted on the front of the unit. The pump assignments are user defined from the operator interface. Cell-Soft Software are also available. Optional tethered speed drive, optional single support flow station and weight platforms are sold separately.. MADE IN THE USA
Bellco Glass, Inc. Single CellTrol,pH/DO/Tem/SP/F 4 Pumps
The CellTrol II can be configured to accept a variety of analog probe signals from a cell culture vessel. Standard signals include pH, dissolved oxygen, temperature, weight, redox, and tachometer feedback from the agitator. A digital input signal from a level probe can be used for anti-foam addition for level control. The CellTrol II control module monitors bioreactor process valves and performs PLC ( Allen-Bradley Programmable Logic Controller) based process control. A touch screen operator interface provides access to all based PLC control functions and allows viewing and modification of control parameters. PLC control drives the inc/dec outlets assigned to each channel as well as to pumps mounted on the front of the unit. The pump assignments are user defined from the operator interface. Cell-SoftSoftware are also available, optional tethered speed drive, optional single support flow station and weight platforms are sold separately.. MADE IN THE USA
Cole-Parmer Oakton pH 700 Benchtop Meter with All-in-One pH Electrode
The easy-to-use, microprocessor-based pH 700 benchtop meter measures pH, mV, relative mV, and temperature. The large, dual-display LCD provides excellent visibility—even from a distance. Automatic temperature compensation (ATC) maintains reading accuracy even with fluctuating temperatures. Five-point pH calibration, with automatic buffer recognition for both USA (pH 1.68, 4.01, 7.00, 10.01, 12.45) and NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH buffers, makes for easy calibration no matter which requirement you need to meet. Meter features HOLD, ATC, selectable °F or °C measurement, recall of electrode slopand offset, and electrode diagnostics. The convenient pull-out quick reference card keeps procedures handy at all times. Meter accepts any pH or ORP electrodes with a BNC connector.